Carel EVD0000200 Electronic Expansion Valve Driver

Carel replacement EVD0000E200 Electronic Expansion Valve Driver module with pLAN protocol to be connected to pCO sistema controllers. This is the perfect solution for air conditioning units, chillers, shelter, heatpumps suitable for applications where the functions of the unit are more important.

The EVD0000E200 is now obsolete.

Some Carel Standard software: FLSTDmMCDE and FLSTDmMSBE are not designed to communicate with the EVD Evolution drivers just as they used to communicate with EVD200. All EVD Evolution drivers can work as a standalone though.

If you require a replacement for the EVD200/300 connected by serial line (pLAN or RS485) to the controller, a cost-effective replacement option is to use an EVD Evolution driver instead and disable the EVD 200/300 in the configuration screen of the pCOx controller so not to have "Offline Alarms".  Wiring from the contactor of the compressor to the Digital input of the EVD Evolution may be a good activation command to the driver. In this way, whenever the compressor is called in, the EVD Evolution is enabled and runs to maintain the Superheat set point on the suction of the compressor.