Overview

Replacement Shaped fill hose between tank and manifold, for SD106/308/313 for your Carel humidifier. When using this on MS2000 units you will need to cut a two-inch piece off of the old hose to use as a bushing on each end because this new hose is roughly 9/16 inch ID. The original old MS2000 feed tube was roughly 3/8 inch ID. When doing so you may also require 2 larger worm style hose clamps that are roughly 3/4 inch ID.

NOTE: If you must use 3/8 inch ID hose you can purchase part 1312331AXX which is sold by the foot. It does not have a preformed elbow in it but will work.

Specifications

More Information
Manufacturer Carel
Product Type Humidification
Product Length 11.7 inches (29.718 cm)
Product Width 11.65 inches (29.591 cm)
Product Height 0.8 inches (2.032 cm)
Product Weight 0.36 lbs (0.163 kg)
Shipping Length 10.1 inches (25.654 cm)
Shipping Width 9.9 inches (25.146 cm)
Shipping Height 1.7 inches (4.318 cm)

Compatibility

Reviews

Write Your Own Review