Carel 1312348AXX Shaped Fill Hose
Replaced by:
Overview
Replacement Shaped fill hose between tank and manifold, for SD106/308/313 for your Carel humidifier. When using this on MS2000 units you will need to cut a two-inch piece off of the old hose to use as a bushing on each end because this new hose is roughly 9/16 inch ID. The original old MS2000 feed tube was roughly 3/8 inch ID. When doing so you may also require 2 larger worm style hose clamps that are roughly 3/4 inch ID.
NOTE: If you must use 3/8 inch ID hose you can purchase part 1312331AXX which is sold by the foot. It does not have a preformed elbow in it but will work.
Specifications
| Manufacturer | Carel |
|---|---|
| Product Type | Humidification |
| Product Length | 11.700 |
| Product Width | 11.650 |
| Product Height | 0.800 |
| Product Weight | 0.360 |
| Dimension Length | 10.100000 |
| Dimension Width | 9.900000 |
| Dimension Height | 1.700000 |
Compatibility
- MS103CL Series Parts 1 Needed
- MS105CL Series Parts 1 Needed
- SC103CL Series Parts 1 Needed
- SC105CL Series Parts 1 Needed
- SD101 Series Parts 1 Needed
- SD102 Series Parts 1 Needed
- SD103 Series Parts 1 Needed
- SD106 Series Parts 1 Needed
- SD303 Series Parts 1 Needed
- SD305 Series Parts 1 Needed
- SD308 Series Parts 1 Needed
- SD313 Series Parts 1 Needed
Reviews
Browser Not Supported
You are using Internet Explorer as your browser, which is no longer supported by our website. Because of this, you can view products but not place orders using Internet Explorer on our site.
Please update your browser to any of the modern browsers listed below or use a different internet browser to place an order on this site.
If you have any questions or need assistance with placing an order, please contact us at 800-825-2148 or sales@carelparts.com
